Table of Contents
Advertisement
•
20 for range 60 – 300
•
300 for range 300 – 6000
The value of A
can be changed for every single
0
program and once changed it remains the same until
changed again (it cannot be automatically reset to
the default value).
10.9
RESET
Reset of device's equipment and configuration.
10.9.1 MC – RESET – CONFIGURATION
Machine configuration.
Parameter which the engineer can force restoration of the
configuration values to the factory values.
This resets all the values except:
-
the relative counters
-
the absolute counters
-
date
-
time
The default setting of the parameter is "UV" (user values)
if the values have been changed from the factory values.
To restore the configuration and equipment values to the
Factory values, set and confirm "FV" (factory values).
[change value with P2/P8, confirm with P5]
10.9.2 ME – RESET – EQUIPMENT
Machine Equipment.
Parameter which the engineer can force restoration of the
equipment values to the factory values.
This resets all the equipment values.
The default setting of the parameter is "UV" (user values)
if the values have been changed from the factory values.
To restore the configuration and equipment values to the
Factory values, set and confirm "FV".
[change value with P2/P8, confirm with P5]
User Manual
193909105 rev.02
BPW1260
Page 60 – 93
Advertisement
Table of Contents
