Table of Contents
Advertisement
4.1
Optional components
Table summarising the optional components which can be installed on the device.
For the load supports compatible with the product and their respective identification code, see "LOAD
SUPPORTS" section.
Description
Optional which configures the device to wash 2 bedpans (in
standard configuration the device can wash 1 bedpan and 2 urine
bottles, or up to 4 urine bottles).
System for fan-assisted removal of the steam from the chamber
and on the load at the end of the cycle and cooling.
System for connecting the water drain to the floor.
The system comprises a suitable drain trap and connecting joints.
Optional P1 detergent dispensing system
Optional tank to collect any detergent spills.
The optional consists of a stainless steel tank on which the
detergent jerry cans are placed so that any small spills are
contained.
RS232 connection port for remote printer
Optional communication port unit: LAN and RS232
RS232 printer for cycle and machine parameter reports
Set for single-phase connection of the device (fitted in the factory
or on site by authorised engineers).
Set for three-phase connection of the device without neutral
(fitted in the factory or on site by authorised engineers).
The optional accessory consists of the specific power supply cable
and the preparation of the suitable electrical connections.
User Manual
193909105 rev.02
Commercial name
BPW-2B
BPW-DRY
BPW-DRAINFLOOR
BPW-P1H
BPW-BINTANK
BPW-232PRINT
BPW-LANI
BPW-PRINTE2
BPW-EC-1
BPW-EC-3
BPW1260
Code
905423
905425
905424
905426
905544
905560
905561
905562
905563
905564
Page 15 – 93
Advertisement
Table of Contents
