Cleaning The Filters In The Wash Cabinet - Miele PLW 8616 Operating Instructions Manual

Laboratory washer
Hide thumbs Also See for PLW 8616:
Table of Contents

Advertisement

Cleaning the filters in the wash cabinet

The filters in the floor of the wash chamber prevent coarse soiling
from coming into contact with the circulation system. Filters can be-
come blocked by soiling. They therefore need to be checked every
day and cleaned as necessary.
 Risk of damage due to blocked waterways.
If the filters are not inserted, dirt particles will end up in the ma-
chine water circuit. The dirt particles may block the nozzles and
valves.
Only start a programme if the filters are inserted.
Check that the filters are positioned correctly when you reinsert
them after cleaning.
Remove large particles of soiling from the surface of the filter.
Turn the holder to the left to release it  and remove it from the
coarse filter .
Rinse the holder under running water, paying particular attention to
the perforation at the top end.
Remove the coarse filter and rinse under running water.
Maintenance
77

Advertisement

Table of Contents
loading

Table of Contents