Miele PLW 8616 Operating Instructions Manual page 33

Empty all load items before loading into the machine, paying partic-

ular attention to relevant regulations.
Remove non-water soluble residues such as paint, adhesives and

polymer compounds using appropriate solvents.
Rinse load items which have been in contact with solvents, chloride

solutions or hydrochloric acid thoroughly with water and drain very
well. Start the reprocessing programme immediately after loading
the machine.
Scoop nutrient media (agar) out of petri dishes.

Care should be taken when removing any blood soiling from ves-

sels. Please adhere to local regulations.
If necessary, rinse the load briefly with water so that larger quanti-

ties of soiling are not introduced into the machine.
Remove all stoppers, corks, labels, sealing wax residue, etc.

Sort small load items such as stoppers and taps in suitable small-

part baskets in order to secure them.
Remove any aids and additives which are difficult to get rid of and
contaminate the load in addition to the original soiling in advance.
These include grease, paper labels and other labels.
Areas of application
33