Programme Sequence; End Of Programme; Cancelling A Programme; Programme Cancellation With Manual Disinfection - Miele PLW 8616 Operating Instructions Manual

Programme can-
cellation with
manual disinfec-
tion
Manual programme
cancellation

Programme sequence

The programme will run automatically once it has been started. You
can find detailed information about the programme sequence and the
programme parameters on the machine display (see "Machine de-
scription", "Control elements on the display").

End of programme

After the programme has ended, the following is displayed:
- The Cycle number
- The time elapsed since the end of the programme
- The Result of the reprocessing process
Programme finished
- The message
The progress bar changes from white to green.
The wash chamber lighting can be switched on automatically de-
pending on the pre-setting.

Cancelling a programme

A reprocessing programme can be cancelled at any time. The wash
water is drained, then the door on the infeed side is released.
Press the  button.

A confirmation prompt is displayed:
Cancel programme?
Confirm the confirmation prompt with

Once the water has finished draining, the following message will ap-
pear on the display:
Programme cancelled
The progress bar is red and the following error message is displayed:
Programme aborted by user
Once the error message has been acknowledged, the programme
can be restarted.
For programmes with the
ated, additional work steps may be necessary for programme can-
cellation. If the thermal disinfection has not been performed, the
wash water must be manually decontaminated.
During the first programme phase:
Press the  button and confirm the

Yes
prompt with .
The error message
There is stationary wash water in the wash chamber which is not be-
ing drained.
.
.
Drainage after disinfection
Programme aborted by user
Operation
Yes .
parameter activ-
Cancel programme?
is displayed.
safety
53