Honeywell Notifier INSPIRE E10 Installation Instructions Manual page 8

Pre-installation Check List
CHECKING YOUR PANEL FOR DAMAGE
It is important to check all supplied equipment for damage before proceeding with the installation!
Before attempting to install the INSPIRE E10/E15 Control panel, or other equipment, you must do the following:
01 After removing the INSPIRE E10/E15 Control panel, modules
and before you proceed with installing it in its chosen location, check for any damage that may have occurred
while in transit.
Note: In the unlikely event that any of the supplied INSPIRE E10/E15 Control panel items has been damaged,
you MUST NOT install it but return it to your supplier, see the following section.
02 If you are satisfied that none of the supplied items has been damaged, you can now proceed with installation.
Refer to the relevant sections that apply to your installation/configuration requirements.
WHAT TO DO IF EQUIPMENT IS RECEIVED DAMAGED
If you have problems regarding the quality of any supplied order items including the INSPIRE E10/E15 Control
panel, its ancillaries or items are missing, follow the procedure below.
01 DO NOT continue with the installation but contact your supplier for advice on what to do next. Similarly, if the
product is found to be faulty during installation contact your supplier immediately.
02 To aid your supplier and the manufacturer, you are requested to quote the manufacturer's unique batch
reference number which can be found on the packaging or inside the back box
03 Note all the details relevant to your complaint, date of receipt, packaging condition and forward it your
supplier.
04 Where the product needs to be returned to your supplier, you are requested to use the original packaging, or
suitable anti-static equivalent, wherever possible.
8
and other related equipment from its packaging,