Honeywell Notifier INSPIRE E10 Installation Instructions Manual page 35

SEMI FLUSH FIXING AN E10/E15 PANEL
These procedures semi flush mounting an E10/E15 panel into a wall.
01 Check the wall recess
02 Ensure the required spacers

03 Fix the backbox into the recess of the wall using suitable fixings, while ensuring there is equal gap between
the backbox and recess for the Semi Flush Surround
04 Adjust and secure the Semi flush Surround at either points 'C' or 'D' using screws supplied while making sure
the flange of the surround is flush against the wall.

05 Fit the door to the backbox
Notifier INSPIRE E10/E15 Control Panels - Installation instructions

is of the correct size, see previous page for information on recess.

are fitted to the backbox.

and ensure the door can be easily opened, closed and locked.

'C'
'D'

fixing.


'C' or 'D'
'C' 'D'
'C' or 'D'
'C' or 'D'



35