Honeywell Farenhyt IFP-2000 Manual page 148

Model IFP-2000/ECS Installation Manual
Table 9-4: Menu choices for Internal/External Power Module
Choices
Enter Point
Select Type
Select Zone/Group
Edit Name
9-15
Type Selections Selections for
UNUSED
B NOTIF NOTIF OUTPUT
CONTROL CIRCUIT
A NOTIF Same as B NOTIF
AUX_PWR CONSTANT
AUX RESET
AUX DOOR
B SWITCH MANUAL PULL
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIREDRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
MANUAL RELEASE
INTERLOCK
STATUS POINT
ECS INPUT
ECS TAMPER
ECS SUPERVISORY
A SWITCH Same as B SWITCH
B DETECT 2-WIRE SMOKE
4-WIRE SMOKE
4-WIRE CO SMK
A DETECT 2-WIRE SMOKE
4-WIRE SMOKE
CO 4-WIRE DET
Function
each Type
User also has Supervised/
Unsupervised option
Constant auxiliary power.
Resettable auxiliary power.
Door holder auxiliary power.
Refer to comments column of
Table 9-3 for description of these options.
Latch or Non-latching feature only appears
for WATERFLOW, FIRE SUPERVISORY,
FIRE TAMPER, ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM AUX2, ECS
INPUT, ECS TAMPER, and ECS
SUPERVISORY.
User also has ECS Event Number 1-8 option
for ECS INPUT.
Only available when an ECS-VCM is
installed in the system.
Used for Class B, 2-wire detectors.
Used for Class B, 4-wire detectors.
Used for Class B, 4-wire CO detectors.
Used for Class A, 2-wire detectors.
Used for Class A, 4-wire detectors.
Used for Class A, 4-wire CO detectors.
Group or Zone selection will appear
depending on the type selected.
See Appendix B.
151430-L8
Comments