Honeywell S7800A1167 Manual page 31

Fig. 69. Select/Exit screen.
Choose Select.
Fig. 70. DISPLAY Setup/Select CLONE screen.
Use the down arrow to scroll through the menu choices until
CS ON/OFF appears.
Fig. 71. DISPLAY Setup/Select: CS ON/OFF screen.
Press ENTER using the two ENTER buttons at the same time.
Fig. 72. Select/Exit screen.
Press Down arrow to Select.
Fig. 73. CS ON/OFF screen.
Use the up/down arrows to select (ON, OFF, or ON,
Temporarily OFF).
Fig. 74. Save Changes/Exit no Save screen.
Use down arrow to Save.
Fig. 75. DISPLAY Setup/Select CLONE screen.
7800 SERIES S7800A1167 KEYBOARD DISPLAY MODULE
Use up or down arrows to move to another selection. If ENTER
is pressed, the following screen appears:
Fig. 76. Select/Exit screen.
Choose up arrow to exit to normal display function.
Display Setup—CS TEST
CS TEST allows the Call Service message to be viewed.
Accuracy and appearance can be viewed without putting the
7800 SERIES into lockout.
To access the CS TEST menu:
Press the left three buttons of the KDM for one second, then
release.
DISPLAY Setup will appear. If you have a personal password,
enter it to enter setup.
Fig. 77. DISPLAY Setup/PASSWORD screen.
Press ENTER by pressing the two ENTER buttons at the same
time.
Fig. 78. Select/Exit screen.
Choose Select.
Fig. 79. DISPLAY Setup/Select CLONE screen.
Use the down arrow to scroll through menu choices until CS
TEST appears.
Fig. 80. DISPLAY Setup/Select CS TEST screen.
Press ENTER using the two ENTER buttons at the same time.
31 65-0311—02