Table of Contents
Advertisement
10
www.aeg.com
• 2A door open - lights on at the highest
dimming level, door closed - lights on
at the selected dimming level,
• 3A door open and closed - lights on at
the selected dimming level,
• 4A door open - lights on at the
selected dimming level, door closed -
lights on at the highest dimming level.
Light brightness (L):
• 9L is the brightest setting while 1L is
the dimmest one.
5.6 Cellaring
In this mode, the appliance switches to
the preset default temperature of 12°C.
To activate the Cellaring mode, tap the
Cellar Mode key. CE on the display starts
blinking. Wait 5 seconds. The mode is
active when CE stops blinking and is lit
at half brightness.
To deactivate the Cellaring mode, tap
Cellar Mode once again. When the
Cellaring mode is deactivated, the
temperature returns to its previous
setting.
5.7 Child Lock mode
Activate the Child Lock mode to lock the
keys from an unintentional operation.
To activate the Child Lock, tap and hold
the Cellar Mode key for 3 seconds.
When the mode is on, the display
alternately shows CL and On lit at full
brightness. After 3 seconds the display
shows the current temperature lit at half
brightness.
If you press any key other
than Cellar Mode, the
display behaves as when the
mode is activated.
To deactivate the Child Lock mode, tap
the corresponding key again. When you
deactivate Child Lock, the display
alternately shows CL and Of lit at full
brightness. After 3 seconds the display
shows the current temperature lit at half
brightness.
The Child Lock mode
deactivates after electricity
interruption or unplugging
the appliance.
5.8 Mute or unmute sounds
The sounds are enabled by default.
To mute or unmute the sounds:
1. Tap and hold the Cellar Mode and
Temperature increase keys
simultaneously for 5 seconds.
2. The display shows Of for 2 seconds
when the sounds are muted, or On
for 2 seconds when the sounds are
unmuted.
5.9 Changing temperature
units
To switch the temperature units between
°C and °F:
1. Tap simultaneously the Cellar Mode
and Temperature decrease keys.
2. Once you set your preferable unit, °C
or °F blinks on the display for 5
seconds.
5.10 Demo mode
Activate the Demo mode to demonstrate
the appliance's features.
To activate the Demo mode, tap and
hold the Light and Cellar Mode keys
simultaneously for 10 seconds.
Once the mode is on, the display shows
dE and On blinking alternately for 5
seconds.
The above message is displayed every 5
minutes to remind you that the appliance
is in the Demo mode.
To deactivate the Demo mode, repeat
the above procedure.
Once you deactivate the mode, the
display shows dE and Of blinking
alternately for 5 seconds.
5.11 High and low
temperature alarm
High temperature alarm
Advertisement
Table of Contents
