Makita CE002G Instruction Manual page 24

NOTE: Make sure that the small disc is in the position
shown in the figure.
Fig.40
► 1 . Small disc
8. Push in the shaft lock button and hold it to lock the
large pulley, and then turn the nut clockwise using the
thin end of the box wrench.
Fig.41
► 1 . Shaft lock button
NOTE: When tightening the nut, apply 19 - 21 N•m as
tightening torque.
9. Attach the cover, and then tighten the hex socket
bolts using the tip of the box wrench.
Fig.42
► 1 . Box wrench 2. Hex socket bolt 3. Cover
1
1
1
2
3
24 ENGLISH