Troubleshooting Internet Browsing; Restoring The Default Configuration And Password; Using The Reset Button - NETGEAR DM111PBL Reference Manual

Adsl2+ ethernet modem
Table of Contents

Advertisement

Troubleshooting Internet Browsing

If your modem can obtain an IP address but your computer is unable to load any Web pages from
the Internet:
Your computer may not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
servers for your use. If you entered a DNS address during the modem's configuration, reboot
your computer and verify the DNS address as described in
Network Access:" in Appendix
with DNS addresses, as explained in your operating system documentation.
Your computer may not have the modem configured as its TCP/IP modem.
If your computer obtains its information from the modem by DHCP, reboot the computer and
verify the modem address as described in
Appendix
B.

Restoring the Default Configuration and Password

This section explains how to restore the factory default configuration settings, changing the
modem's administration password to password and the IP address to 192.168.0.1. You can erase
the current configuration and restore factory defaults in two ways:
Use the Erase function of the Web Configuration Manager (see
Erasing Your Settings" on page
Use the Default Reset button on the rear panel of the router. Use this method for cases when
the administration password or IP address is not known.

Using the Reset button

To restore the factory default configuration settings without knowing the administration password
or IP address, you must use the Default Reset button on the rear panel of the router.
1. Press and hold the default reset button until the Power LED turns red (about 10 seconds).
2. Release the Default Reset button and wait for the router to reboot.
Troubleshooting
DM111P ADSL2+ Ethernet Modem Reference Manual
B. Alternatively, you can configure your computer manually
"Preparing a Computer for Network Access:" in
3-2).
v1.0, August 2006
"Preparing a Computer for
"Backing Up, Restoring, or
4-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm111pv2Dm111pDm111pv1 - adsl2+ ethernet modem

Table of Contents