NETGEAR DM111PBL Reference Manual page 34

DM111P ADSL2+ Ethernet Modem Reference Manual
This screen shows the following parameters:
Table 3-1. Menu 3.2 - Modem Status Fields
Field
System Up Time
Account Name
Firmware Version
ADSL Port
MAC Address
IP Address
Network Type
IP Subnet Mask
Domain Name Server (DNS) Displays the DNS Server IP addresses being used by the modem. These
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Modem
Modem Status
Downstream Speed
Upstream Speed
VPI
VCI
3-6
Description
The time that the modem has been connected to the Internet in the
format days:hours:minutes:seconds.
The Account Name assigned to the modem during setup.
Displays the modem firmware version. This value will change if you
upgrade your modem.
These parameters apply to the Internet (ADSL) port of the modem.
Displays the Ethernet MAC address being used by the Internet (ADSL)
port of the modem.
Displays the IP address being used by the Internet (ADSL) port of the
modem. If no address is shown, the modem cannot connect to the
Internet.
The network type depends on your ISP.
This field displays the IP Subnet Mask being used by the Internet (ADSL)
port of the modem.
addresses are usually obtained dynamically from the ISP.
These parameters apply to the Ethernet port of the modem.
Displays the Ethernet MAC address being used by the Local (LAN) port
of the modem.
Displays the IP address being used by the Local (LAN) port of the
modem. The default is 192.168.0.1.
If OFF, the modem will not assign IP addresses to PCs on the LAN.
If ON, the modem will assign IP addresses to PCs on the LAN.
Displays the IP Subnet Mask being used by the Local (LAN) port of the
modem. The default is 255.255.255.0.
These parameters apply to the ADSL port of the modem.
The connection status of the modem.
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
The Virtual Channel Identifier setting.
v1.0, August 2006
Managing Your Modem