Configuring Lan Setup - NETGEAR RangeMax DGN3500 User Manual

2. In the IP Address field, type the IP address to assign to the computer or server. (Choose an IP
address from the modem router's LAN subnet, such as 192.168.0.x.)
3. Type the MAC address of the computer or server.
Tip: If the computer is already present on your network, you can copy its MAC
address from the Attached Devices screen and paste it here.
4. Click Apply to enter the reserved address into the table.
Note: The reserved address is not assigned until the next time the computer contacts
the modem router's DHCP server. Reboot the computer or access its IP
configuration and force a DHCP release and renew.
To edit or delete a reserved address entry:
1. Select the radio button next to the reserved address you want to edit or delete.
2. Click Edit or Delete.

Configuring LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The modem router is shipped preconfigured to use private IP addresses on the LAN side and to act
as a DHCP server. The modem router's default LAN IP configuration is:
• LAN IP address: 192.168.0.1
• Subnet mask: 255.255.255.0
These addresses are part of the designated private address range for use in private networks and
should be suitable for most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.
Advanced Configuration
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
v1.0, November 2009
5-7