Configuring Lan Setup - NETGEAR DGN3500 User Manual

Type the MAC address of the computer or server.
3
If the computer is already present on your network, you can copy its MAC
Tip:
address from the Attached Devices screen and paste it here.
Click Apply to enter the reserved address into the table.
4
The reserved address is not assigned until the next time the
Note:
computer contacts the wireless modem router's DHCP server.
Reboot the computer or access its IP configuration and force a
DHCP release and renew.
To edit or delete a reserved address entry:
Select the radio button next to the reserved address you want to edit or delete.
1
Click Edit or Delete.
2

Configuring LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The wireless modem router is shipped preconfigured to use private IP addresses on the LAN
side and to act as a DHCP server. The wireless modem router's default LAN IP configuration
is:
LAN IP address: 192.168.0.1
•
Subnet mask: 255.255.255.0
•
These addresses are part of the designated private address range for use in private networks
and should be suitable for most applications. If your network has a requirement to use a
different IP addressing scheme, you can make those changes in the LAN Setup screen.
To configure LAN settings, log in to the wireless modem router, and under the Advanced
heading, select LAN Setup. The following screen displays:
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500
Advanced Configuration
66