NETGEAR RangeMax DGN3500 User Manual page 49

Figure 3-8
The settings are:
• Service. From this list, select the application or service to be allowed or blocked. The list
already displays many common services, but you are not limited to these choices. Use the Add
Custom Service button in the Services screen to add any additional services or applications
that do not already appear.
• Action. Choose how you want this type of traffic to be handled. You can block or allow
always, or you can block or allow according to the schedule you have defined in the Schedule
screen.
• LAN Users. These settings determine which packets are covered by the rule, based on their
source LAN IP address. Select the option that you want:
– Any. All IP addresses are covered by this rule.
– Address range. If this option is selected, you must fill in the Start and Finish fields.
– Single address. Enter the required address in the Start field.
• WAN Users. These settings determine which packets are covered by the rule, based on their
destination WAN IP address. Select the option that you want:
– Any. All IP addresses are covered by this rule.
Protecting Your Network
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
v1.0, November 2009
3-11