Makita VC3012M Original Operating Instructions page 12

D
Makita VC3012M
GB
When using an extension lead, check the minimum cross-sections of the cable:
F
Cable length
NL
up to 20 m
20 to 50 m
I
Operation
N
Depending on how hazardous the dust is, the cleaner must be fitted with appropriate fiters.
S
• Dusts with OEL values > 0.1 mg/m³ (observe
DK
any additional national regulations)
• Wood dusts & concrete dusts
SF
• Dusts with OEL values > 0.1 mg/m³ (observe
E
any additional national regulations)
• Wood dusts & concrete dusts
P
GR
• Dusts with OEL values > 0.1 mg/m³ (observe
any additional national regulations)
TR
• Wood dusts & concrete dusts
Before picking up dust with occupational exposure limit values:
SLO
1. Check that all the filters are present and properly fitted.
2. The hose diameter and the setting for the suction hose diameter must be the same.
HR
SK
ø21
CZ
ø27
PL ø32
ø36
H
ø38
3. When the motor is running, hold the suction hose shut. For safety reasons, an acoustic warning
RO
sounds if the air speed in the suction hose drops to below 20 m/s.
BG
RUS
EST
Picking up liquids
Before liquids are picked up, always remove the filter bag.
LV
CAUTION – Check that the float works properly.
LT
WARNING – If foam develops or liquid emerges, stop work immediately and empty the dirt tank.
AL
Cleaning the filter element
If suction performance drops:
MK
1. Switching on the vacuum cleaner.
2. Close the nozzles or suction hose opening with the palm of your hand.
SR
UK
18
Type of dust
ø21
ø27
ø32
ø36
ø38
Switch position
I
0
AUTO
Cross section
< 16 A
2
1,5 mm
2,5 mm 2
Filter bag/waste bag/filter element
Waste bag
Order No. P-70297
Filter bag
Order No. 107418007
Filter element "M"
Order No. P-70219
< 25 A
2
2,5 mm
4,0 mm 2
Function
On
Off
Auto-On/Off