Makita DUC101 Instruction Manual
Cordless pruning saw
Hide thumbs
Also See for DUC101:
- Instruction manual (137 pages) ,
- Instruction manual (129 pages) ,
- Instruction manual (21 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DUC101
Summary of Contents for Makita DUC101
- Page 1 INSTRUCTION MANUAL Cordless Pruning Saw DUC101 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DUC101 Overall length 357 mm (without guide bar and battery) Rated voltage D.C. 18 V Net weight 1.1 kg 1.6 - 2.0 kg Standard guide bar length 100 mm Recommended guide bar length 100 mm Applicable saw chain type... -
Page 3: Intended Use
Save all warnings and instruc- Symbols tions for future reference. The followings show the symbols which may be used The term "power tool" in the warnings refers to your for the equipment. Be sure that you understand their mains-operated (corded) power tool or battery-operated meaning before use. - Page 4 Remove any adjusting key or wrench before Maintain power tools and accessories. Check for turning the power tool on. A wrench or a key left misalignment or binding of moving parts, break- age of parts and any other condition that may attached to a rotating part of the power tool may affect the power tool’s operation.
-
Page 5: Additional Safety Instructions
Either of these reactions may cause you to lose General pruner saw safety warnings control of the saw which could result in serious personal injury. Do not rely exclusively upon the Keep all parts of the body away from the saw safety devices built into your saw. As a pruner saw chain when the pruner saw is operating. - Page 6 • Protective dungarees of cut-resistant fabric; WARNING: DO NOT let comfort or familiarity • Safety shoes or boots with non-slip soles, with product (gained from repeated use) replace steel toes, and cut-resistant fabric lining; strict adherence to safety rules for the subject •...
-
Page 7: Parts Description
13. If the tool is not used for a long period of time, also void the Makita warranty for the Makita tool and the battery must be removed from the tool. charger. -
Page 8: Functional Description
Indicating the remaining battery capacity FUNCTIONAL DESCRIPTION Only for battery cartridges with the indicator CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before... -
Page 9: Overheat Protection
Overheat protection ASSEMBLY When the tool or battery is overheated, the tool stops automatically. In this case, let the tool and battery cool CAUTION: Always be sure that the tool is before turning the tool on again. switched off and the battery cartridge is removed Overdischarge protection before carrying out any work on the tool. - Page 10 Remove the sprocket cover then remove the saw Align the hole on the guide bar with the pin on the tool chain and guide bar from the tool body. body, and then place the guide bar as shown in the figure. Installing the saw chain To install the saw chain, perform the following steps: Pull the lever up.
-
Page 11: Adjusting Saw Chain Tension
Fit one end of the saw chain on the top of the Turn the lever clockwise until the sprocket cover is guide bar. secured then return it to the original position. Fit the other end of the saw chain around the sprocket, then attach the guide bar to the tool body so that the hole on the guide bar is aligned with the pin on the body. -
Page 12: Operation
The oil delivery may otherwise be impaired. NOTICE: Use the saw chain oil exclusively for Makita tools or equivalent oil available in the market. NOTICE: Never use oil including dust and parti- Fig.19 cles or volatile oil. -
Page 13: Working With The Tool
Push the button on the oil tank cap so that the After refilling, hold the tool away from the material to button on the other side stands up, and then remove the be cut. Start it and wait until lubrication on saw chain is oil tank cap by turning it. adequate. -
Page 14: Maintenance
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Sharpening the saw chain Sharpen the saw chain when: •... -
Page 15: Cleaning The Guide Bar
— Sharpen the shortest cutter first. Then the length Cleaning the guide bar of this shortest cutter becomes the standard for all other cutters on the saw chain. Chips and sawdust will build up in the guide bar groove. — Guide the file as shown in the figure. They may clog the bar groove and impair the oil flow. Clean out the chips and sawdust every time when you sharpen or replace the saw chain. -
Page 16: Storing The Tool
Always fit a new locking ring when replacing the Cleaning the oil discharge hole sprocket. Small dust or particles may be built up in the oil discharge hole during operation. These dust or particles may impair the oil to flow and cause an insufficient lubrication on the whole saw chain. When a poor chain oil delivery occurs at the top of guide bar, clean the oil discharge hole as follows. -
Page 17: Instructions For Periodic Maintenance
Screws and Inspection. nuts TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. Malfunction status Cause Action The tool does not start. Battery cartridge is not installed. -
Page 18: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 20 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885999-921 www.makita.com 20220817...