5.7 System Start-up
The procedure in this section requires user-wiring and application programming to
be completed. The following procedure is recommended after application set-up is
completed.
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
If warnings or alarms occur, see or Chapter 7.4 List of Warnings and Alarms.
31-00559-01
Press [Auto On].
Apply an external run command.
Adjust the speed reference throughout the speed range.
Remove the external run command.
Check sound and vibration level of the motor to ensure that the system is
working as intended.
47