Honeywell 7800 Series Product Data page 41

d Display values are as follows:
• n represents a numbered value
• T represents a terminal number
• x represents the suffix letter of the Relay module eBurner control terminal name is displayed
f Assigned annunciator terminal name is displayed.
Table 6. Selectable Messages.
Editing of this feature is accessed by selecting "Selected status" from the Display Setup menu (see Fig.
58). The current parameter setting is displayed when the page is initially entered.
Fig. 58. Selected status message setup
The up and down arrow buttons are used to scroll through the message choices on the
edit line. The right and left arrow buttons are used to tab to the save commands, "Yes" and
"No". When the input focus is on the save commands the up and down arrow buttons scroll
between "Yes" and "No". When the message is set to the value desired the "Yes" command is
selected and the OK button is pressed to commit the change. If the user decides not to save
the displayed message choice, the "No" command is selected and the OK button is pressed.
In both save command cases control returns back to the Display setup menu.
Backlight Intensity Level
The backlight intensity level specifies the intensity that the LCD backlight should have at
this installation location. The following intensity levels can be specified:
• 5 = Brightest
• 4 = Brighter
• 3 = Normal (no adjustment) – default
• 2 = Slightly darker
• 1 = Darker
• 0 = Darkest
Access to setup this parameter is obtained from the Display setup menu (see Fig. 59).
Current adjustment level setting is displayed when the page is initially entered.
Fig. 59. Backlight intensity level setup
The up and down arrow buttons are used to scroll through the adjustment levels on the
edit line. The right and left arrow buttons are used to tab to the save commands, "Yes" and
"No". When the input focus is on the save commands the up and down arrow buttons scroll
between "Yes" and "No". When the level is set to the desired value the "Yes" command is
selected and the OK button is pressed to commit the change. If the user decides not to save
the displayed level, the "No" command is selected and the OK button is pressed. In both
save command cases control returns back to the Display setup menu.
Language
The language to use for the display module can be selected from one of the following:
• English (default)
• Spanish
• French
Setup of the language to use is accessed from the Display setup menu (see Fig. 60). The
line for the current language setting is highlighted on the page.
7800 SERIESS7800A2142 4-Line LCD Keyboard Display Module
41
SCROLL
CHOICES
32-00110-07