Cleaning - Zenith HydroTap G5 Installation Instructions Manual

Command centre
Hide thumbs Also See for HydroTap G5:
Table of Contents

Advertisement

!
!
Wipe surfaces with a damp cloth or antibacterial alcohol wipes, then wipe
dry with a clean, dry microfibre cloth or paper towel.
Food-grade disinfection wipes may be used to clean around and within the
tap spout.
!
IMPORTANT
Do not use strong, corrosive, or abrasive cleaning materials.
Do not use air-drying disinfectant sprays.
Failure to remove the cleaning liquid may damage the finish of the tap.
Touch-Free Wave Tap
Do not use abrasives to clean the sensor lenses at the sides, top and rear of
the tap.
This could cause permanent malfunction and void warranty.
30
807042NZ v1.02 08.22 HydroTap G5 UltraCare Install Instructions

Cleaning

!
!

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultracare bcu40Ultracare bcu60Ultracare bcu100

Table of Contents