Using Additional Handsets; Registering An Additional Handset - AEG Elegant User Manual

XIV.

Using additional handsets

You can use up to five Elegant additional handsets with your Elegant base
to extend your phone system without needing to install extension sockets for
each new phone.
Your Elegant handset can also be registered to up to 3 other bases. You can
then select the base you would prefer to use.
If you have purchased a Elegant multiple pack any additional handsets come
pre-registered to the base.
If you have purchased an additional handset separately you must register it to
your Elegant base before it can be used.
1.

Registering an additional handset

At the base:
1. Press and hold
flashing. You have up to 60 seconds to register the handset.
At the handset:
1. If the handset is new and the display shows
Press « MENU ».
The display shows « REGISTRATION ». Press « SELECT ».
Or
If the handset has already been registered to another base the standby
display is shown. Press « MENU », scroll Redial/Up or Phonebook/Down
to « REGISTRATION » and press « SELECT ».
2. « REGISTER HANDSET »
3. Bases are displayed. If necessary, scroll
new base you wish to register your Elegant handset to and press « SELECT ».
4. Enter the system PIN (Default PIN code = 0000) and press
5. The display shows
number) then « HANDSET REGISTERED ». The handset is automatically
assigned the next available handset number.
Note: If registration is not successful first time, please repeat the process
again in case the base registration period ran out of time. If there are
already 5 handsets registered to the base, the registration will fail. You must
deregister another handset before you can register the new one.
Find for 3 seconds until the base Power / In use starts
is highlighted. Press « SELECT ».
« SEARCHING BASE X » (where X is the chosen base
« PLEASE REGISTER ».
Redial/Up or Phonebook/Down to a
58
« OK ».