Change The Remote Access Pin; Switch Your Answering Machine On Remotely - AEG Elegant User Manual

Memory full
If the memory is within 10 seconds of becoming full while a caller is leaving a
message, they will hear, " Please complete your message within 10 seconds".
If they are still talking when the memory becomes full the caller hears, "Thank
you for calling", and the machine will hang up.
The OGM will set to Answer Only. You must delete messages before your
Elegant can record new messages.
-

Change the remote access PIN

You should change the security PIN from the original setting of 0000.
It is advisable to make a note of your new PIN code and keep it somewhere safe.
1. Press « MENU », scroll Phonebook/Down to « ANSWER MACHINE »
and press « SELECT ».
2. Scroll Phonebook/Down to « ANSWER SETTINGS » and press « SELECT ».
3. Scroll Redial/Up or Phonebook/Down to « REMOTE ACCESS » and
press « SELECT ».
4. Scroll Redial/Up or Phonebook/Down to highlight « SET REMOTE PIN »
and press « SELECT ».
5. Enter the Old 4-digit PIN and press
6. Enter the new 4-digit Pin and press
7. Enter the new PIN again and press
8. Press « BACK » to return to standby.
-

Switch your answering machine on remotely

If you forget to switch your answering machine on, you can do it remotely
from another phone.
1. Dial your telephone number and let it ring. After 20 rings you will hear your
outgoing message.
2. Press *, then enter your security code. (Default setting = 0000)
3. Press 0 and your answering machine will switch on ready to answer
incoming calls.
Time saver
When you ring in to access your messages remotely, if your answering
machine is set to time saver and you have new messages it will answer after
2 rings, if you do not have any new messages, it will answer after 6 rings. This
means you can hang up after 3 rings knowing you have no new messages,
saving you time and the cost of the call.
« SAVE ». (Default setting = 0000)
« SAVE ».
« SAVE ».
48