Consultation And Brokering (Switch Between Calls); Conference Call (3-Party Call); Calling The Handsets From The Base Set - AEG Birdy Operating Manual

5.7

Consultation and Brokering (Switch Between Calls)

You can switch between an external and an internal call.
1. You hold an external communication.
2. Press the program key
up key (3) until INTERCOM is displayed.
3. Press the program key
4. Press a key from 1 to 5 on the numerical keypad to select the handset of
the internal calling partner you want to call.
5. Press the arrow down
external and internal calls.
5.8

Conference Call (3-Party Call)

You can hold a conversation with two internal DECT handsets and one exter-
nal calling partner simultaneously.
1. You have a communication with an external calling partner.
2. Press the program key
3. Press the arrow up key
4. Press the program key
5. The external calling partner is put on hold.
6. INT is displayed.
7. Press a key from 1 to 5 on the numerical keypad to select the handset of
the internal calling partner you want to call.
8. As soon as the internal calling partner answers the call, the counter will start.
9. Press 3 seconds the hash key #.
10. CONFERENCE is displayed.
11. You have a 3-party call.
12. The conference call will be broken if one of the calling partners hangs up.
The other calling partners can still communicate.
5.9

Calling the Handsets From the Base Set

This feature enables you to call all handsets subscribed to the base set.
1. The handsets are in standby (no tone).
2. You cannot find your handset.
3. Shortly press the page/subscribe key
4. All handsets which are subscribed to this base set will start ringing.
5. Now that you hear the handset ringing you can find it again.
6. To stop the handset from ringing, shortly press the line key
hear the dial tone.
(4). The external call is on hold. Press the arrow
(4). INT is displayed.
(11) or arrow up
(4).
(3) until INTERCOM is displayed.
(4).
(3) key to switch between the
(19).
(2). You will
27