Activating Of The Direct Call; Deactivating Of The Direct-Call; Calling The Handsets From The Base Set ( Paging); Call Duration Display - AEG D 5000 Instruction Manual

Activating of the Direct Call

1. Press the menu key B (4).
2. Press the arrow key l
3. Press the key Mute/Delete ? (10) for ca. 2s.
4. DIRECT ON is displayed. Direct-Call is now active.

Deactivating of the Direct-Call

1. Shortly press the menu key B (4) twice. The standard screen is displayed.
Direct-Call is deactivated.

Calling the Handsets from the Base Set ( Paging)

This feature enables you to call all handsets subscribed to the base set. In case you
can't find a handset, paging will help easily.
1. The handsets are in standby (no tone).
2. You cannot find your handset.
3. Shortly press the page/subscribe key (15 or 26).
4. All handsets which are subscribed to this base set will start ringing.
5. Now that you hear the handset ringing you can find it again.
6. To stop the handset from ringing, shortly press the line key (2).You will hear the
dial tone.

Call Duration Display

As soon as you press the line key (2), call duration will be displayed in
minutes : seconds.
E.g.: 01 : 20 = 1 minute, 20 seconds
After the call, call duration remains displayed for 5 seconds.

Mute

This feature enables you to speak with a third person in the same room without
your calling partner hearing the conversation. The Microphone can be switched off
temporarily.
1. You are holding a communication, the line/charge indicator 5 (16 or 20) and the
symbol ^ is displayed.
2. Press the mute/delete key (10) to switch off the microphone.
3. is displayed.
4. You can speak with a third person. Your calling partner will hear nothing.
5. Press the mute/delete key (10) to switch on the microphone.
6. will disappear.
7. Your calling partner will hear you again.
32
(11) or k (3), until DIRECT is displayed.