Table of Contents
Advertisement
Cannot dial out or receive calls
.
Check that the mains power is correctly connected.
.
The batteries may need recharging.
.
Has there been a power cut? If so, place the handset back on the base for
10 seconds and try again. If it still does not work disconnect the batteries
and mains power for 10 minutes, then reconnect and try again.
You have a dial tone, but the phone will not dial out
.
You may need to change the dial mode from tone to pulse, see page 29.
.
If you are connected to a switchboard, check whether you need to dial an
access code.
Handset does not ring
.
The ringer volume may be switched off, see page 26.
.
Check that the mains power is correctly connected.
.
Make sure the handset is registered to the base, see page 58.
No display
.
The batteries may be flat, dead or incorrectly inserted. Recharge or replace
the batteries.
icon flashes
.
Is the handset registered correctly to the base, see page 58.
.
Check that the mains power is correctly connected.
.
Check that the handset is within range of the base.
.
The batteries are low, place the handset on the base/charger to recharge.
icon not scrolling
.
Try cleaning the charging contacts.
.
Check that the mains power is correctly connected.
You hear the busy tone when you press Talk/Handsfree.
.
Make sure the handset is in range of the base.
.
Another handset registered to your Elegant base may be on the line.
61
Advertisement
Table of Contents
