Cisco BTS 10200 Softswitch Manual page 46

Automatic Number Identification/Dialed Number Identification Service Manipulation
Usage Guidelines Primary Key Token(s): ID, RULE
Foreign Key Token(s): id
Add Rules:
•
•
•
Change Rules:
•
•
•
Syntax Description AUTO_REFRESH
DESCRIPTION
DISPLAY
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-30
digman profile id must exist.
if match-string is not equal to NULL; then replace-string is not equal to NULL.
if match-noa is not equal to NULL; then replace-noa is not equal to NULL.
id must exist.
if match-string is not equal to NULL; then replace-string is not equal to NULL.
if match-noa is not equal to NULL; then replace-noa is not equal to NULL.
Description: Specifies whether to display cached data on the screen. Valid
only for the show command.
CHAR(1): Y/N (Default = Y).
Y—Queries the database for the most current data.
N—Queries the database for the most current data only if the cached data is
unavailable.
Valid for Command: show
Default Value: Y
Possible Value: Y, N
Parser: BooleanParser
Description: Service provider-defined description.
VARCHAR(64): 1-64 ASCII characters.
Valid for Command: add, change, delete, show
Possible Value: [1_64]
Parser: TextParser
Description: Specifies what token information to display on the screen. Valid
only for the show command.
VARCHAR(1024): 1-1024 (Default = all tokens are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Chapter 1 Digit Translations
OL-8001-10