Cisco BTS 10200 Softswitch Manual page 248

Routing Types
If the RTM_CP_CARRIER_2_LECOSS is available and if the traffic is not toll traffic, the Cisco BTS
Step 9
10200 Softswitch will use the RTM_CP_CARRIER_2_LECOSS to select the call route and to route the
call.
Example:
Carrier All = N
Step 10 If the RTM_CP_CARRIER_2_LECOSS is not available, the Cisco BTS 10200 Softswitch will use the
carrier guide index to select the call route and to route the call.
Example:
Carrier All = Y
Figure 4-3
(carrier 9999 use
(carrier use dial-plan
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
4-8
Carrier Based Routing
Carrier_Routing
(carrier)
CARRIER
Yes
SCREENING
dial-plan n)
No
CARRIER->SP
Yes
(carrier service-
provider)
No
CARRIER->
USE_DP
Yes
carrier 9999
use dial-plan n)
No
RTM_CP_CARRIER_2_LECOSS
RTM_CP_BLOCK
SP_Routing
(CARRIER->SP)
(service-provider)
Dial-plan routing
Skip this for toll traffic.
(CARRIER ALL=N)
CARRIER->route_guide_idx
(CARRIER ALL=Y)
Chapter 4 Command Line Interface Routing
OL-8001-10