Cisco BTS 10200 Softswitch Manual page 106

Automatic Number Identification/Dialed Number Identification Service Manipulation
SP_ID
START_ROW
STATUS
STATUS_
MONITORING
TARGET
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-90
Description: Foreign key: Service Provider table. The service provider ID.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, audit, sync, show
Possible Value: [1_16]
Parser: TextParser
Description: Specifies to begin displaying data on the screen at a specific
row. Valid only for the show command.
INTEGER: 1-100000000 (Default = 1).
Valid for Command: show
Default Value: 1
Possible Value: [1_100000000]
Parser: DecimalParser
Description: Status of the trunk group.Valid only for the show command.
VARCHAR(25): 1-25 ASCII characters.
Valid for Command: audit, sync, show
Default Value: OOS
Possible Value: OOS, INS, MAINT, OOS_PENDING, MAINT_PENDING
Parser: TextParser
Valid for Command: add, change, audit, sync, show
Default Value: N
Possible Value: Y, N
Parser: BooleanParser
Description: Specifies the network element to receive the request.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
CA—Network identifier of a Call Agent.
FSPTC (POTS/Tandem/Centrex Feature Server)—Network identifier of a
specific Feature Server.
FSAIN (AIN Feature Server)—Network identifier of AIN Feature Servers.
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Chapter 1 Digit Translations
OL-8001-10