Service Provider; Sub Dp Dest Interlata - Cisco BTS 10200 Softswitch Manual

Chapter 4 Command Line Interface Routing

Service Provider

The Service Provider CLI example is used in the
Service Provider Example:
CLI>show service-provider id=test
Reply : Success: Entry 1 of 1 returned.
ID=test
SP_BASED_ROUTING=N
USE_DIAL_PLAN=Y
ANI_WB_LIST=NONE

Sub DP Dest Interlata

The Sub DP Dest Interlata CLI example is used in the
Sub DP Dest Interlata Example:
CLI>show sub-profile id=sp50
Reply : Success: Entry 1 of 1 returned.
ID=sp50
DIAL_PLAN_ID=dp50
LOCAL_PFX1_OPT=NR
TOLL_PFX1_OPT=RQ
POP_ID=50
OLI=0
EA_USE_PIC1=Y
CLI>show dial-plan id=dp50;digit-string=202
Reply : Success: Entry 1 of 1 returned.
ID=dp50
DIGIT_STRING=202
REQD_DIGITS=10
DEST_ID=interlata
SPLIT_NPA=NONE
MIN_DIGITS=10
MAX_DIGITS=10
NOA=NATIONAL
CLI>show destination dest-id=interlata
Reply : Success: Entry 1 of 1 returned.
DEST_ID=interlata
CALL_TYPE=INTERLATA
ROUTE_TYPE=ROUTE
ROUTE_GUIDE_ID=test
ZERO_PLUS=Y
INTRA_STATE=Y
GAP_ROUTING=N
OL-8001-10
Command Line Interface Routing Examples
Carrier Based Routing
0+ Interlata Call
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
routing example.
routing example.
4-37