Cisco BTS 10200 Softswitch Manual page 35

Chapter 1 Digit Translations
Examples
show noa-route-profile;
add noa-route-profile id=NoaRt;
change noa-route-profile id=NoaRt; description=noa specific route profile ID
delete noa-route-profile id=NoaRt;
Usage Guidelines Primary Key Token(s): ID
Syntax Description
AUTO_REFRESH
DESCRIPTION
DISPLAY
ID
OL-8001-10
Description: Specifies whether to display cached data on the screen. Valid
only for the show command.
CHAR(1): Y/N (Default = Y).
Y—Queries the database for the most current data.
N—Queries the database for the most current data only if the cached data is
unavailable.
Valid for Command: show
Default Value: Y
Possible Value: Y, N
Parser: BooleanParser
Description: Service provider-defined description.
VARCHAR(64): 1-64 ASCII characters.
Valid for Command: add, change, delete, show
Possible Value: [1_64]
Parser: TextParser
Description: Specifies what token information to display on the screen. Valid
only for the show command.
VARCHAR(1024): 1-1024 (Default = all tokens are displayed). Permitted
values are any valid token that can be shown for this command. Multiple
tokens can be entered by separating with a comma.
Valid for Command: show
Possible Value: [1_1024]
Parser: TextParser
Description: Primary key. The NOA Route Profile id.
VARCHAR(16): 1-16 ASCII characters.
Valid for Command: add, change, delete, show, audit, sync
Mandatory: add, change, delete
Possible Value: [1_16]
Parser: TextParser
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Nature of Address Manipulation
1-19