Cisco 11500 Series Hardware Installation Manual page 79

Chapter 2 Cabling the CSS
Table 2-8
Quantity
1 or 2
1
2
78-13884-03
Tools and Supplies (continued)
Description
2-hole grounding lug. Lug must
fit 6 AWG stranded copper or
37/24 flex cables. Each lug must
have two holes, centered
0.625 in. (1.587 cm) apart, and
must accept M5 screws.
One lug is supplied by Cisco
Systems in the accessory kit. The
supplied lug is for the router end
of the ground wire. You may
wish to use a lug other than the
one supplied. If you need a lug
for the facility end of the ground
wire, you must supply it.
Crimping tool
M5 screws with captive, locking
washers
Cisco 11500 Series Content Services Switch Hardware Installation Guide
Connecting the Chassis to Ground
Comments
Recommended types:
Panduit no. LCD6-10A-L
•
(1 supplied in accessory
kit)
Panduit no. LCC6-10A-L
•
(long barrel)
Thomas & Betts no.
•
256-30695-1183(*4*)
• Burndy no. YA6CL2TC10
Must fit diameter of grounding
lugs. Cisco Systems
recommends that you use a
crimping tool recommended by
the lug manufacturer.
Included in accessory kit
shipped with the CSS.
2-23