Configuring Proxy Cache - Cisco 11500 Series Hardware Installation Manual

Using the Configuration Script

Configuring Proxy Cache

Cisco 11500 Series Content Services Switch Hardware Installation Guide
3-16
!**************** OWNER ******************
owner L5_Owner
content L3_Rule
add service Server1
vip address 192.168.3.8
balance aca
active
content L5_Rule
add service Server1
vip address 192.168.3.8
protocol tcp
port 80
url "/*"
balance aca
active
##########################################
## Setup Completed Successfully!!!
##########################################
For detailed configuration information, refer to the Content
Services Switch Basic Configuration Guide.
A proxy cache configuration enables the CSS to use a Virtual IP address (VIP) to
load balance Web traffic to proxy cache servers based on domain name.
When you select Proxy Cache, the script automatically:
Creates an owner (Proxy_Owner)
•
• Creates a content rule (Proxy_Rule) and defines:
Service type as proxy-cache
–
Protocol tcp
–
Port 8080
–
URL "/*"
–
– Load balance method as domain
Application type HTTP
–
Activates the services
•
• Activates the content rule
Chapter 3 Booting and Configuring the CSS
##
78-13884-03