Troubleshooting The Css Modules - Cisco 11500 Series Hardware Installation Manual

Appendix C Troubleshooting

Troubleshooting the CSS Modules

Troubleshooting the CSS Modules
CSS 11503 and CSS 11506 module status is indicated by the Status LED on the
module front panel. For information about the module LEDs, refer to Chapter 2,
Cabling the CSS.
Table C-5 provides suggestions for correcting problems that may occur with the
modules in the CSS 11503 and CSS 11506.
Do not remove an active module from the CSS. The module must be in a powered
Caution
down state as indicated by the show chassis command. Before removing an SM,
power down the CSS.
As implemented in WebNS 5.10 and greater, when a CSS module fails during
Note
normal operations, the CSS reboots.
Cisco 11500 Series Content Services Switch Hardware Installation Guide
C-21
78-13884-03