Replace Gmt Fuses - Cisco 124792 User Manual

3.2.5 Replace GMT Fuses

3.2.5 Replace GMT Fuses
Locate the GMT fuse that is to be removed.
Step 1
Grasp the fuse firmly at the front and pull out
Step 2
Figure 3-10
For information on installing GMT fuses, see the
Step 3
page
When replacing GMT fuses, always use the same size fuse unless the GMT fuse output cabling is
Caution
upgraded as well. For more information on the appropriate cable/fuse sizes, see
Cisco AC/DC Power System User Guide, R1.0
3-10
Removing a GMT Fuse
2-25.
Chapter 3
(Figure 3-10).
"2.5.1 Install GMT Fuse Connections" procedure on
Component Replacement
Table 1-2 on page 1-6.
May 2006