Table of Contents
Advertisement
2.1.3 Installation and Commissioning Checklist
•
•
•
1
2.1.3 Installation and Commissioning Checklist
•
•
•
•
•
•
•
•
•
•
2.1.4 Installation Materials
Table 2-1
Power System.
Table 2-1
Description
M6 0x20mm screw (thread forming)
12-24 x1/2" screw (thread forming)
M6 cage nut
Mounting bracket 600mm ETSI rack
2A GMT fuse
5A GMT fuse
10A GMT fuse
15A GMT fuse
Standard AC plug
Cable ties
ESD wrist strap
Cisco AC/DC Power System User Guide, R1.0
2-2
Insulated Phillips and flathead screwdriver sets
Insulated wire & cable strippers/crimpers (for ground lug, DC cable, alarm, and GMT cable
installations)
8mm socket or wrench for ground cable installation
AC/DC system shelf mounted securely in rack
1 RU Distribution Shelf mounted securely in rack directly above the system shelf (if applicable)
AC and DC cabling meets local and national electrical code specifications
Installation in ETSI racks allows for front-to-back ventilation and the use of a ventilated door and
cabinet top
System alarm cabling is installed and secure
Power cables are secure and installed correctly
Rectifiers are installed and seated correctly in the system shelf
The controller and 1 RU Distribution faceplates are installed and secure (if applicable)
System shelf rear cover is installed and secured
System powers up and all red LEDs are extinguished after a few minutes
and
Table 2-2
list the Cisco supplied installation materials that ship with the Cisco AC/DC
Table 2-3
lists materials that will need to be furnished at the install location.
Supplied Materials for the System Shelf
Qty
Use
6
Shelf mounting screws (ETSI racks/cabinets)
6
Shelf mounting screws (ANSI, IEC racks/
cabinets)
6
Shelf mounting nut (ETSI racks/cabinets)
2
Ear mounts (ETSI racks/cabinets)
2
GMT fuse panel
2
GMT fuse panel
2
GMT fuse panel
2
GMT fuse panel
4
AC plugs that meet local requirements
12
Securing cables
1
ESD protection
Chapter 2
System Installation
May 2006
Advertisement
Table of Contents
