Install The Rectifiers - Cisco 124792 User Manual

2.3.1 Install the Rectifiers

Table 2-4
Shelf Size
19 inch
19 inch
19 inch
19 inch
2.3.1 Install the Rectifiers
To install the rectifiers in the Cisco AC/DC Power System:
Locate the first (left-most when viewed from the front) rectifier install location.
Step 1
Make sure that the rectifier handle is in the OPEN position (handle pulled away from the rectifier body).
Step 2
Place the module in front of the correct mounting slot on the shelf with the handle facing out
Step 3
(Figure 2-14
Slide the module until it contacts the interface connection at the rear of the shelf.
Step 4
Step 5 Fully insert the rectifier by pushing the module handle towards the shelf; the handle will rise up and lock
the module into place
Cisco AC/DC Power System User Guide, R1.0
2-16
Individual AC Feed Specifications
AC Input (Fuse or
Rectifier Breaker) 110/208 VAC
Positions Single Phase
1 15A
2 15A
3 15A
4 15A
#1).
(Figure 2-14 #2).
Chapter 2 System Installation
Minimum AC Wire
Gauge
UL Style SOOW
14 AWG (2.5mm²)
3 conductor
14 AWG (2.5mm²)
3 conductor
14 AWG (2.5mm²)
3 conductor
14 AWG (2.5mm²)
3 conductor
May 2006