Cisco 124792 User Manual page 43

Chapter 2 System Installation
Figure 2-13
AC cabling is routed through either side of the system shelf and secured using tie off points.
Step 8
AC cabling should be tied off inside the cabinet/rack.
Step 9
Step 10 Repeat for all AC cables.
Step 11 Connect the terminated AC plug to the AC receptacle at the install location.
Note
May 2006
Routing AC Cables
A separate AC receptacle is required for each AC cable, and each receptacle should be on its own
circuit breaker to maximize protection against AC circuit breaker failure.
2.3 Install AC Power Cables
Cisco AC/DC Power System User Guide, R1.0
2-15