Table of Contents
Advertisement
3.2.4 Replace a Rectifier
Figure 3-8
Remove the alarm cable connections from the rear of the breaker
Step 5
Step 6
Pull the breaker straight out from the 1RU Distribution Shelf.
Step 7
To reinstall a replacement 1RU Distribution Shelf see the
procedure on page
3.2.4 Replace a Rectifier
For more information on uninstalling a rectifier, see the
Note
page
Locate the rectifier that is to be removed.
Step 1
Loosen the mounting screws to allow the rectifier handle to open
Step 2
Grasp the top of the handle and pull down until the handle locks into the open position
Step 3
Cisco AC/DC Power System User Guide, R1.0
3-8
Removing a Circuit Breaker
2-6.
4-3.
Chapter 3
Component Replacement
(Figure
3-8).
"2.2.2 Install the 1 RU Distribution Shelf"
"4.2.2.3 Remove Modules" section on
(Figure 3-9
#1).
(Figure 3-9
#2).
May 2006
Advertisement
Table of Contents
