Using The Ip Phone With Your Bluetooth-Enabled Mobile Phone; Enabling Bluetooth - Cisco SPA525G User Manual

Using Advanced Phone Features

Using the IP Phone With Your Bluetooth-Enabled Mobile Phone

Using the IP Phone With Your Bluetooth-Enabled Mobile
Phone
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
The Cisco SPA525G and Cisco SPA525G2 support Bluetooth to allow use of the
phone with a Bluetooth-enabled headset. (See
Headsets" on page 18.) Only the Cisco SPA525G2 supports the use of your
Cisco IP phone in conjunction with Bluetooth-enabled mobile phone.
You can do the following:
• Pair your Bluetooth-enabled mobile phone and Cisco SPA525G2 to make
and receive mobile calls. Your mobile phone is assigned a line button on your
Cisco SPA525G2.
• Switch audio for in-progress calls between your mobile phone and the
Cisco SPA525G2.
• Import your mobile phone address book to your Cisco SPA525G2 personal
address book.
• Use your Cisco SPA525G2 as a handsfree device for your mobile phone.
Not all mobile phones support this function. See the list of Bluetooth-enabled
mobile phones supported with the Cisco SPA525G2 that is posted at the Cisco
support community at http://www.cisco.com/go/smallbizsupport, and also
consult the latest Cisco SPA525G2 release notes available at cisco.com.

Enabling Bluetooth

Press Setup.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
With Bluetooth highlighted, press the Right Arrow key until a blue check mark
appears.
Press Set.
"Connecting Bluetooth
4
61