Receiving Mobile Phone Calls By Using The Cisco Spa525G2; Switching Audio From Your Cisco Spa525G2 To Your Mobile Phone; Viewing Mobile Phone Battery And Signal Information On Your Cisco Spa525G2 - Cisco SPA525G User Manual

Using Advanced Phone Features
Using the IP Phone With Your Bluetooth-Enabled Mobile Phone
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide

Receiving Mobile Phone Calls by using the Cisco SPA525G2

If your mobile phone is paired with the Cisco SPA525G2, an incoming call to your
mobile phone is also shown on the Cisco SPA525G22.
Do one of the following:
• Press the Answer softkey to connect to the call.
• Press the red flashing line button associated with your mobile phone.
• Pick up the Cisco SPA525G2 handset.
• Press Ignore to ignore the call.
Switching Audio from Your Cisco SPA525G2 to Your Mobile
Phone
You can only switch audio back and forth between the Cisco SPA525G2 and your
mobile phone if the call is connected by using the Cisco SPA525G2-to-mobile
phone feature. You cannot switch a call on your Cisco SPA525G2 that is not
associated with your mobile phone.
To switch audio from your Cisco SPA525G2 to your mobile phone during a call,
press Handset.
To switch audio back to the Cisco SPA525G2 from your mobile phone, on a
connected call, press Handsfree.
Viewing Mobile Phone Battery and Signal Information on Your
Cisco SPA525G2
When a mobile phone call is incoming, outgoing, or connected on your
Cisco SPA525G2, the phone display shows information about your mobile phone.
Not all mobile phones support this function.
The display bubble shows the following information if it is supported by the mobile
phone:
• Battery indicator—Shows the battery life left on your mobile phone.
• Signal strength—Shows the signal strength for your mobile phone.
• Network—The phone network for your mobile phone.
4
66