Placing A Three-Way Conference Call - Cisco SPA525G User Manual

Using Basic Phone Functions

Placing a Three-Way Conference Call

STEP 3
STEP 4

Placing a Three-Way Conference Call

STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Scroll to Call Park Status and press Select.
Choose the parked call you want to retrieve and press Unpark.
To initiate a conference call:
Press the Conf button during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
Dial the second person's telephone number.
Press the Conf button again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected. To keep the other
parties in a call, but disconnect yourself from the call, press Join.
To conference two active calls on your phone:
On one of the active calls, press ConfLx. If you have two active lines, the calls are
conferenced. If you have more than two active lines, you must scroll to choose the
line you want to conference in.
Press Select.
3
46