Makita CL002G Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Ultrasonic Jewelry Cleaner
  5. CL002G
  6. Instruction manual

Makita CL002G Instruction Manual

Cordless cleaner
Hide thumbs Also See for CL002G:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Cordless Cleaner
CL002G
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita CL002G

Summary of Contents for Makita CL002G

  • Page 1 INSTRUCTION MANUAL Cordless Cleaner CL002G Read before use.

  • Page 2: Specifications

    If the tool is not used for a long period of time, the battery must be removed from the tool. • Do not short the battery cartridge. • See the chapter “MAINTENANCE” for the appropriate details of precautions during user maintenance. SPECIFICATIONS Model: CL002G Capacity with dust bag 500 mL with paper filter 330 mL Continuous use 1 (Quiet mode) Approx.

  • Page 3: Safety Warnings

    20. Do not expose a battery pack or appliance Intended use to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause The tool is intended for collecting dry dust. explosion. 21. Follow all charging instructions and do not charge the battery pack or appliance outside SAFETY WARNINGS the temperature range specified in the instruc-...

  • Page 4: Functional Description

    Avoid storing battery cartridge in a con- causing fires, personal injury and damage. It will tainer with other metal objects such as also void the Makita warranty for the Makita tool and nails, coins, etc. charger. Do not expose battery cartridge to water or rain.

  • Page 5: Installing Or Removing Battery Cartridge

    Let the tool and battery(ies) cool down. If no improvement can be found by restoring protection system, then contact your local Makita Service Center. Indicating the remaining battery capacity Press the check button on the battery cartridge to indi- cate the remaining battery capacity.
  • Page 6 Switch action NOTE: When the remaining battery capacity gets low, the lamp starts blinking. The timing, at which the lamp starts blinking depends on the temperature at work place and the battery cartridge conditions. Fig.4 ► 1. Suction power change button 2. ON/OFF button Fig.5 To start the cleaner, simply push the ON/OFF button.
  • Page 7 There is no distinction between the upper and lower NOTE: When the dust bag or the paper filter is not sides of the dust bag. You may insert its protrusion of installed in the cleaner, the front cover does not close either side into the lower groove of the dust stopper.
  • Page 8 Spread the cloth part of the dust bag inside the Unfold the entrance of the paper filter before cleaner. setting it on the dust stopper. Fig.12 Fig.15 Close the front cover completely. Insert the protrusion of the paper filter into the lower groove on the dust stopper as shown in the figure.

  • Page 9: Operation

    Overlap the frame of dust stopper with that of the paper filter. OPERATION CAUTION: Do not move your face close to the air vent when operating the cleaner. If foreign objects are blown into eyes, it may result in personal injury.
  • Page 10 When using attachment without lock function Corner nozzle Fit on the corner nozzle for cleaning corners and crev- NOTICE: To connect attachment without lock ices of a car or furniture. function, twist and insert it securely into the suc- tion inlet of the cleaner. To disconnect the attach- ment, pull it away while twisting.
  • Page 11 Cleaning without nozzle Push the button to open the front cover. Opening it until a click is heard allows a positive stop at that You can pick up powder and dust without nozzle. position. Fig.30 Fig.32 ► 1. Front cover 2. Button For picking up dust on a floor in a standing position, it is convenient to attach the extension wand (straight pipe) Pull out both the orange-colored dust stopper and...

  • Page 12: After Use

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Fig.38 12 ENGLISH...
  • Page 13 Dust bag Removing and installing the sponge filter Wash the dust bag in soapy water when it is clogged with dust and the cleaner power becomes weak. Dry it CAUTION: After cleaning sponge filter, be out thoroughly before use. An insufficiently dried filter sure to install it on the cleaner.

  • Page 14: Troubleshooting

    • Dust bag CAUTION: These accessories or attachments • Paper filter are recommended for use with your Makita tool • Free nozzle specified in this manual. The use of any other • Seat nozzle accessories or attachments might present a risk of •...
  • Page 15 Cyclone attachment NOTE: Check that the cyclone attachment, cleaner, and extension wand (straight pipe) are locked prop- erly before use. NOTE: Empty the dust case of the cyclone attach- ment and the dust bag of the cleaner when dust has accumulated.
  • Page 16 When the mesh filter gets dirty badly, clean it in the NOTE: Check that the cyclone attachment, cleaner, following procedures. and extension wand (straight pipe) are locked prop- erly before restarting operation. Turn the mesh filter counterclockwise and remove it while the hooks are unlocked. NOTE: If the suction force does not recover even after disposing of the dust and cleaning the mesh filter, check whether dust has accumulated in the dust...
  • Page 20 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885928-227 www.makita.com 20210930...

Table of Contents