Function Description; Count-Only Mode - Canon imageFORMULA DR-X10C User Manual

2.

Function Description

The Other Functions are described below.

■ Count-Only Mode

Counts the number of loaded document sheets by simply
feeding them through the scanner.
Hint
The Count-Only mode is executed by the Count Only key on the
control panel, and can be used to count document sheets even
when no computer is connected.
1.
Place the documents into the tray.
2.
Press the Count Only key on the control panel.
Count Only Key
The Count Only key lights blue when the Count-Only
mode is enabled.
3.
Press the Start key to start scanning and count the
loaded document sheets.
See "User Mode" on p. 4-9, for descriptions of the functions set from the User Mode.
To reset the page counter, press and hold the Stop key for
two seconds while the Count Only key is lit.
■ Verify Scan
The scanner compares the document page count obtained
from the Count-Only mode (or entered manually) with the
actual count of document pages scanned, and an error
message is displayed if the counts do not match.
1.
Setting the Count.
The document page count can be specified by using the count
obtained from the Count-Only mode or by pressing the [
[
2.
Select Verify Count in the ISIS/TWAIN driver
settings.
4-4
Chapter 4 Other Functions
IMPORTANT
Stop Key
Hint
] keys to enter a number.
(See "[Verify Count] Check Box" on p. 8-21.)
] and