Replacing Ink Cartridges - Canon imageFORMULA DR-X10C User Manual

Replacing Ink Cartridges

Replace the ink cartridge using the following procedure.
IMPORTANT
After replacing an ink cartridge, run a test print to confirm proper
printing. (See "Imprinter Testing" on p. 5-20.)
■ Replacing the Ink Cartridge (Pre-Imprinter)
IMPORTANT
When the upper unit is raised, the pre-imprinter carriage moves
to the ink cartridge replacement position. Therefore, the
scanner must be ON when replacing the pre-imprinter ink
cartridge.
1.
Press the Open/Close button and carefully raise the
upper unit until it stops.
Open/Close Button
The carriage moves to the replacement position.
2.
Turn the lock lever downwards.
3.
Open the carriage and remove the ink cartridge.
4.
Peel off the seal covering the nozzles of a new ink
cartridge.
5-15
Chapter 5 Maintenance