Specifying The Scanning Area; Page Sizes - Canon imageFORMULA DR-X10C User Manual

■ Scanning documents wider than the feeder
inlet (Folio Scan)
When you want to scan a document that is wider than the
feeder inlet, you can scan the document if you fold the
document into two, load it into the feed tray, and set the
scanning side setting to [Folio].
Bypass
Mode Key
Hint
Folio Scan supports up to A1-size (23.4" × 33.1" (594 × 841
mm)) documents when used together with the Long Document
Mode.
(See p. 4-7.)
Front Back
Reconstructed Image
10-5
Chapter 10 Practical Examples
■ Registering of unregistered non-standard

page sizes

You can register a non-standard page size that has not been
registered as a page size by naming and registering it as a
custom page size in the [Page Size] setting of the Scan
Area dialog box, which is opened from the [Area] button
on the [Basic] tab sheet. (See p. 8-11.)

Specifying the Scanning Area

Configure the following settings when you want to specify the
area of the document to scan.
■ Specifying an area
Specify the area of the document to scan in the Scan Area
dialog box. (See p. 8-11.)