Function Description - Canon imageFORMULA DR-X10C User Manual

Function Description

The Other Functions are described below.
Count-Only Mode
Counts the number of loaded document sheets by simply feeding
them through the scanner.
Hint
The Count-Only mode is executed by the Count Only key on the
control panel, and can be used to count document sheets even when
no computer is connected.
1
Place the documents into the tray.
2
Press the Count Only key on the control panel.
Count Only Key
The Count Only key lights blue when the Count-Only mode is
enabled.
See "User Mode" on p. 77, for descriptions of the functions set from the User Mode.
71
3
Press the Start key to start scanning and count the loaded
document sheets.
IMPORTANT
To reset the page counter, press and hold the Stop key for two
seconds while the Count Only key is lit.
Stop Key