Imprinter Testing - Canon imageFORMULA DR-X10C User Manual

Imprinter Testing

After replacing an ink cartridge or cleaning the print head, perform
a test print to confirm proper printing. Test printing is performed by
the "Imprinter Test" User Mode selection.
IMPORTANT
Before performing an Imprinter Test, load a sheet of paper into the
Document Feed Tray.
■ Performing an Imprinter Test
Use the following procedure to execute the Imprinter Test.
1.
Load a sheet of paper into the Document Feed Tray
for test printing.
2.
Press the Menu key on the control panel.
Menu Key
The User Mode is activated.
3.
Press the [ ] key twice to display "Imprinter Test".
4.
Press [Enter].
The Imprinter Test is enabled.
5.
Press the [ ] key to select [OK], and press [Enter].
The test print is executed.
IMPORTANT
If no paper is loaded for test printing, the imprinter test finishes
without printing.
6.
Press the [Stop] key to exit the User Mode.
5-20
Chapter 5 Maintenance
Enter Key