3.
Names and Functions of Parts
The names and functions of the DR-X10C parts are shown below.
Front View, Feeder Inlet, and Eject Outlet
Chapter 1 Before You Start Using the Scanner
a Document Eject Tray
Scanned documents are output here.
b Document Feed Tray
Load documents to be scanned.
c Power Switch
Turns the scanner ON and OFF.
d Control Panel
(See p. 1-11.)
e Document Guides
Adjust to match the width of documents, so that ejected
documents stack neatly.
f Eject Paper Stoppers
Adjust to match the length of documents, to avoid
document spillage.
(See p. 3-11.)
g Document Eject Tray Extension
Extend as needed to match the length of the documents.
(See p. 3-11.)
h Document Guides
Adjust to match the width of documents.
p. 3-10.)
i Document Guide Lock Lever
Locks the Document Guides.
j Document Feeder Tray Extension
Extend as needed to match the length of the documents.
(See p. 3-9.)
1-10
(See p. 3-11.)
(See p. 3-7.)
(See p. 3-2.)
(See p. 3-11.)
(See p. 3-9 and
(See p. 3-10.)