Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita UR012GT201
Summary of Contents for Makita UR012GT201
- Page 1 INSTRUCTION MANUAL Cordless Grass Trimmer UR012G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: UR012G Handle type Bike handle No load speed 3: 0 - 6,400 min (at each rotation speed level) 2: 0 - 5,000 min 1: 0 - 3,500 min Overall length 1,790 mm (without cutting tool) Nylon cord diameter 2.4 - 3.0 mm Applicable cutting tool and 2-tooth blade... -
Page 3: General Power Tool Safety Warnings
Electrical safety Warning; Disconnect battery before Power tool plugs must match the outlet. Never maintenance. modify the plug in any way. Do not use any Warning: Hot surface. Risk of burns. Do not adapter plugs with earthed (grounded) power touch metal part until cooled. tools. - Page 4 Do not let familiarity gained from frequent use Keep handles and grasping surfaces dry, of tools allow you to become complacent and clean and free from oil and grease. Slippery ignore tool safety principles. A careless action can handles and grasping surfaces do not allow for cause severe injury within a fraction of a second.
-
Page 5: General Instructions
Save all warnings and instruc- Work area safety tions for future reference. Operate the tool under good visibility and day- light conditions only. Do not operate the tool in darkness or fog. Intended use Do not operate the tool in explosive atmo- This tool is only intended for cutting grass, spheres, such as in the presence of flammable weeds, bushes and undergrowth. -
Page 6: Putting Into Operation
10. Do not replace the battery with wet hands. Do not overreach. Keep proper footing and balance at all times. Watch for hidden obsta- Do not replace the battery in the rain. cles such as tree stumps, roots and ditches to 12. -
Page 7: Cutting Tools
Do not use a cutting tool which is not recom- risk. mended by Makita. Never use cutting blades close to solids, Use an applicable cutting attachment for the such as fences, walls, tree trunks and job in hand. -
Page 8: First Aid
When transporting the tool in a vehicle, prop- When asking for help, give the following information: erly secure it to avoid turnover. Otherwise — Place of the accident damage to the tool and other baggage may result. — What happened —... - Page 9 Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life Charge the battery cartridge before completely discharged.
-
Page 10: Parts Description
PARTS DESCRIPTION Speed indicator ADT indicator Caution lamp Main power button (ADT = Automatic Torque Drive Technology) Lock-off lever Reverse button Battery cartridge Hanger Switch trigger Knob Handle Protector (for cutter blade / nylon cutting head / plastic blade) Protector (for chisel Protector (for shredder Protector extension (for Shoulder harness... -
Page 11: Functional Description
Tool / battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a tool/battery protection system. This system automatically cuts off power to the motor to extend tool and battery life. The tool will automatically stop during operation if the tool or battery is placed under one of the following conditions: WARNING: Always be sure that the tool is switched off and the battery cartridge is removed... -
Page 12: Main Power Switch
Indicator lamps Remaining CAUTION: Before installing the battery car- capacity tridge into the tool, always check to see that the switch trigger actuates properly and returns to Lighted Blinking the "OFF" position when released. Operating a tool with a switch that does not actuate properly can lead 75% to 100% to loss of control and serious personal injury. -
Page 13: Electric Brake
This tool is equipped with an electric brake. If the tool ADT(Cutter Cutter blade 3,500 - 6,400 consistently fails to quickly stop after the switch trigger blade) Plastic blade is released, have the tool serviced at a Makita service center. ADT(Nylon Nylon cutting 3,500 - 5,000 Electronic function cutting head) -
Page 14: Installing The Handle
Hex wrench storage ASSEMBLY CAUTION: Be careful not to leave the hex WARNING: Always be sure that the tool is wrench inserted in the gear case. It may cause switched off and battery cartridge is removed injury and damage to the tool. before carrying out any work on the tool. Failure to switch off and remove the battery cartridge may result When not in use, store the hex wrench as illustrated to in serious personal injury from accidental start-up. - Page 15 For cutter blade Correct combination of the cutting tool and the protector Attach the protector to the clamp using bolts. CAUTION: Always use the correct combi- nation of cutting tool and the protector. A wrong combination may not protect you from the cutting tool, flying debris, and stones. It can also affect the bal- ance of the tool and result in an injury.
- Page 16 For chisel blade Cutter blade / chisel blade / shredder blade Optional accessory Align the protrusion on the gear case with the groove on CAUTION: When handling a cutter blade, the protector, and then attach the protector to the clamp always wear gloves and put the blade cover on using bolts.
-
Page 17: Nylon Cutting Head
For the chisel and shredder blade, mount them as Nylon cutting head illustrated. NOTICE: Be sure to use genuine Makita nylon Chisel blade cutting head. Shredder blade ► 1 . Nylon cutting head 2. Spindle 3. Hex wrench 4. Loosen 5. Tighten Insert the hex wrench through the hole in the gear case to lock the spindle. -
Page 18: Operation
Adjust the shoulder harness to a comfortable OPERATION working position. Attaching the shoulder harness WARNING: Be extremely careful to maintain control of the tool at all times. Do not allow the tool to be deflected toward you or anyone in the work vicinity. Failure to keep control of the tool could result in serious injury to the bystander and the operator. - Page 19 Adjust the hanger position as shown in the figure 2-tooth, 3-tooth, 4-tooth, 8-tooth and then tighten the hex socket bolt. blades, nylon cutting head, and plastic blade These cutting tools are useful for cutting grass and weeds. Swing the tool evenly in a half-circle from right to left. Repeat right-to-left stroke while advancing forward.
-
Page 20: Shredder Blade
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 20 ENGLISH... - Page 21 Replacing the nylon cord WARNING: Use only the nylon cord with diameter specified in this instruction manual. Never use heavier line, metal wire, rope or the like. Failure to do so may cause damage to the tool and result in serious personal injury. WARNING: Always remove the nylon cutting head from the tool when replacing the nylon cord.
- Page 22 B&F Z5L 100 mm 80 mm 22 ENGLISH...
- Page 23 121-M10L 100 mm 23 ENGLISH...
- Page 24 Replacing the plastic blade Replace the plastic blade if it is worn out or broken. When installing the plastic blade, align the direction of the arrow on the blade with that of the protector. ► 1 . Arrow on the protector 2. Arrow on the blade Storage When storing the tool, loosen the knob and fold the handle at a right angle.
-
Page 25: Troubleshooting
TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. State of abnormality Probable cause (malfunction) Remedy Motor does not run. Battery cartridge is not installed. Install the battery cartridge. - Page 28 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885903-906 20210515 www.makita.com...